ACS-010-2-SC00-HE2-PM | TILTIX Inclinometer Posital Fraba Vietnam Distributor

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

TILTIX Inclinometer

ACS-010-2-SC00-HE2-PM

General Specifications
Application	2-Axes Position Monitoring and Leveling
Measurement Range	± 10°
Absolute Accuracy	0.10°
Resolution	0.01°

Electrical Specifications
Supply Voltage	10 – 30 V DC (On power supplies comply with EN 50178)
Power Consumption (no load)	≤0.7 W
EMC Emitted Interference	DIN EN 61000-6-4
EMC: Noise Immunity	DIN EN 61000-6-2
Reverse Polarity Protection	Yes
Short Circuit Protection	Yes

Environmental Specifications
Operating Temperature	-40 °C (-40 °F) - +85 °C (+185 °F)
Storage Temperature	-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient	0.004°/ K
Protection Class	IP54, IP64 – IP69K (EN 60529)
Shock Resistance	≤100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance	1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)

Mechanical Specifications
Housing Type	1E3-47x52
Housing Material	Fibre-Reinforced PBT (Polybutylene Terephthalate)
Potting Material	PUR (Polyurethane)
Weight	0 (0.00 lb)

Certificates / Lifetime
MTTF	300 years
Electrical Lifetime	>10⁵ h
Certificates	CE

Interface
Interface	Analog Current 4 – 20 mA + RS232
Teach In	Zero Positioning, Inverse Direction, Elevation Range Programming
Settling Time	125 ms
Output Type	Current 4 – 20 mA
Max Load Resistance	270 Ω @ 10 V DC (500 Ω @ 15 V DC)
Transmission Rate	RS232: min. 1200 Baud; max. 115200 Baud
Default Transmission Rate	RS232: 9600 Baud
Linearity	± 0.02%

Electrical Connection
Connection Type	Connector M12
Connector	M12, Male, 8 pin, a coded

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA N.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.