MCD-AC005-0012-D10D-2AW | IXARC Rotary Encoder | Posital Fraba Vietnam Distributor

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

        0162.999.888.7

Email : vinhmv.pitesco@gmail.com

IXARC Rotary Encoder

MCD-AC005-0012-D10D-2AW

Interface
Interface	Analog Current
Manual Functions	Start and End point via Cable or Connector

Outputs

Electrical Data
Supply Voltage	12 – 30 V DC (On power supplies comply with EN 50178)
Current Consumption	Typical 40 mA
Start-Up Time	< 250 ms
Max Load Resistance	500 Ω (Max. value for supply voltage of 15 V. For higher supply voltage higher load resistances can be used)
Supply Voltage Cuttoff / Output	14.8 V / 3.6 mA
Analog Accuracy	@ 4 mA = ±10µA; @ 20 mA = ±50 µA
Linearity	0.15%
Settling Time	80 ms
Reverse Polarity Protection	Yes
Short Circuit Protection	Yes
EMC: Emitted Interference	DIN EN 61000-6-4
EMC: Noise Immunity	DIN EN 61000-6-2
Electrical Lifetime	>10⁵ h

Sensor
Technology	Magnetic
Resolution Singleturn	12 bit
Accuracy	±0.36°
Code	Analog Current 4 – 20 mA
Cycle Time Base Sensor	600 µs
Minimum Measurement Range	0 – 22.5°
Resolution of Output	Max. 12 bits over entire measureing range (Fractional Turns - Resolution decreases less than 12 bits when measurements range is less than 90 degrees)
Multiturn Range	Singleturn

Environmental Specifications
Protection Class (Shaft)	IP54, IP64 – IP69K (EN 60529)
Protection Class (Housing)	IP54, IP64 – IP69K (EN 60529)
Operating Temperature	-40 °C (-40 °F) - +85 °C (+185 °F)
Humidity	98% RH, no condensation

Mechanical Data
Housing Material	Steel
Housing Coating	Powder Coated
Flange Type	Synchro, ø 36 mm Heavy Duty
Flange Material	Aluminum
Shaft Type	Solid, Length = 20 mm
Shaft Diameter	ø 10 mm (ø 0.39")
Shaft Material	Stainless Steel V4A (1.4112, 440 B), hardened
Max. Shaft Load	Axial 180 N, Radial 180 N
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr)	10 (180 N / 180 N), 15 (150 N,150 N), 30 (100 N / 100 N)
Friction Torque	≤ 5 Ncm @ 20 °C, (0.11 oz-in @ 68 °F)
Max. Permissible Mechanical Speed	≤ 6000 1/min
Shock Resistance	≤300 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance	≤ 30 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance	≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length	56 mm (2.20")
Weight	160 g (0.35 lb)

Electrical Connection
Connection Orientation	Axial
Cable Length	2 m [79"]
Wire Cross Section	0.38 mm² / AWG 22
Material / Type	PUR / PU
Cable Diameter	6 mm (0.24 in)
Minimum Bend Radius	30 mm (1.18 in) fixed, 60 mm (2.36 in) flexing

The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm.

© FRABA N.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.